
9 1 3 6 0 D 8       D I A M A X 3 4 0 0    MAXTOR
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders   11530|     |     |
Capacity form/unform 13600/      MB        Heads           8|     |     |
Seek time   / track   9.0/ 0.9 ms          Sector/track     |     |     |
Controller           IDE / ATA4            Precompensation
Cache/Buffer           256 KB SDRAM        Landing Zone
Data transfer rate   18.600 MB/S int       Bytes/Sector      512
                     33.000 MB/S ext
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 71
Power: sleep              W     Humidity     %         5 95    |      5 95
       standby        0.9 W     Altitude    km    -0.061  3.048| -0.061 12.192
       idle           4.4 W     Shock        g        20       |    200
       seek           9.6 W     Rotation   RPM      5400
       read/write     4.8 W     Acoustic   dBA        36
       spin-up       20.2 W     ECC        Bit
                                MTBF         h     500000
                                Warranty Month        36
Lift/Lock/Park     YES          Certificates                                  

**********************************************************************
                        L   A   Y   O   U   T
**********************************************************************
MAXTOR   DIAMOND MAX 3400



                     Pin 1
     J1 IDE Connector  |                J2 Power
  +----------- --------+-++-----------++---------+
  | .................... || @ * *   * || X X X X |
  | .......... ......... || @ * * * * || X X X X |
  +----------------------++-+-+-+-+-+-++-+-+-+-+-+
                            | | | | |    | | | |
                            | | | | |    | | | |
      J50 Master/Slave -----+ | | | |    | | | +-+12V
      J48 Cable Select -------+ | | |    | | +---+12V Return
      J46 4092 Cyl Limitation---+ | |    | +----- +5V Return
      J44 Factory Reserved -------+ |    +------- +5V
      J42 Factory Reserved ---------+






**********************************************************************
                      J   U   M   P   E   R   S
**********************************************************************
MAXTOR   DIAMOND MAX  INSTALLATION SHEET

 Jumper Setting
 ==============

                                        +---+---+---+---+---+
                                        |J50|J48|J46|J44|J42|
  +-------------------------------------+---+---+---+---+---+
  | Master/Slave                        |   |   |   |   |   |
  |  Only Drive in single drive system* | J |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  Master in a dual drive system*     | J |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  Slave in a dual drive system       | O |   |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  | Cable Select                        |   |   |   |   |   |
  |  Disabled*                          |   | O |   |   |   |
  +-------------------------------------+---+---+---+---+---+
  |  Enabled                            |   | J |   |   |   |
  +-------------------------------------+---+---+---+---+---+
    J=Jumpered O=Open *=Default



**********************************************************************
                      I   N   S   T   A   L   L
**********************************************************************
MAXTOR   91360D8/91190D7/91020D6/90845D5/90680D4/90510D3/90340D2

 Notes on installation
 =====================

 Installation direction
 ----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

 The drive will operate in all axis (6 directions).



 Idle
 The drive is spinning., the actuator is parked and powered
 off, and all other circuitry is powered on. The drive is
 capable of responding to read commands within 40 ms.

 Read/Write
 Data is being read from or written to the drive.

 Spin-up
 The drive is spinning up following initial application
 of power and has yet not reached full speed. Maximum
 current draw lasts one second.


 Standby
 The spin motor is not spinning. The drive will leave this
 mode upon receipt of a command that requires disk access.
 The time-out value for this mode is programmable. The
 buffer is active to accept write data.

 Sleep
 This is the lowest power state - with the interface set to
 inactive. A software or hardware reset is required to return
 the drive to the standby state.


