
D L G A - 2 3 0 8 0   T R A V E . 3 X P    IBM
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders        | 5968|     |
Capacity form/unform  3080/      MB        Heads           8|   16|     |
Seek time   / track  12.0/ 4.0 ms          Sector/track     |   63|     |
Controller           IDE / ATA2 FAST/ENHA  Precompensation
Cache/Buffer            96 KB              Landing Zone
Data transfer rate    5.500 MB/S int       Bytes/Sector      512
                     16.600 MB/S ext PIO4
Recording method                                    operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 65
Power: sleep          0.1 W     Humidity     %         8 90    |      5 95
       standby        0.3 W     Altitude    km    -0.300  3.048| -0.300 12.000
       idle           1.1 W     Shock        g       100       |    500
       seek           2.6 W     Rotation   RPM      4000
       read/write     2.6 W     Acoustic   dBA
       spin-up        6.0 W     ECC        Bit   ENHANCED, ON THE FLY,SMART
                                MTBF         h
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

**********************************************************************
                        L   A   Y   O   U   T
**********************************************************************
IBM      DLGA-22690/23080  TRAVELSTAR 3XP




              +--------------------------------------+
              |                                      |
              |                                      |
              |                                      |
              +--------Interface-------------49------+
              |       **********************1 **47 Jumper
              |       *************x********* **48   |
              +------44----------------------50------+
              +                                      +

 Pin position 20 is left blank for secure connector insertion.







**********************************************************************
                      J   U   M   P   E   R   S
**********************************************************************
IBM      DLGA/DSOA

 Jumper Setting
 ==============

 A jumper cable is available at the interface connector to determine
 drive address.

 Using cable selection, the drive address depends on the condition
 of pin 28 of the AT interface cable. In the case when pin 28 is
 ground or low, the drive is a master. If pin 28 is open or high
 level, the drive is a slave.


 DLGA
 +----------------------------------------------49--47
 | * * * * * * * * * * * * * * * * * * * * * * * * * |
 | * * * * * * * * * * * *   * * * * * * * * * * * * |
 +----------------------------------------------50--48


 ------49--47
        * * |  No jumper = MASTER
        * * |
 ------50--48

 ------49--47
        * X |
        * X |  SLAVE
 ------50--48

 ------49--47
        * * |
        xxxx|  CABLE SELECTION
 ------50--48

 ------49--47
        xxxx|
        * * |  RESERVED (=MASTER)
 ------50--48


 ------49--47
        X * |
        X * |  NEVER ATTACH A JUMPER HERE!!!
 ------50--48


