
D C A S - 3 4 3 3 0   U L T R A S T A R    IBM
                                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 3.5"/SLIMLINE         Cylinders    8120|     |     |
Capacity form/unform  4330/      MB        Heads           6|     |     |
Seek time   / track  14.0/     ms          Sector/track     |     |     |
Controller           SCSI3 SI/WI/ULTR/FA2  Precompensation
Cache/Buffer           448 KB SEGMENTED    Landing Zone
Data transfer rate    5.000 MB/S int       Bytes/Sector      512
                     40.000 MB/S ext SYNC
Recording method     RLL 1/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5/12 V       Temperature *C         5 55    |    -40 65
Power: sleep              W     Humidity     %         8 90    |      5 95
       standby            W     Altitude    km                 |
       idle               W     Shock        g        10       |     75
       seek               W     Rotation   RPM      5400
       read/write         W     Acoustic   dBA        37
       spin-up            W     ECC        Bit
                                MTBF         h     800000
                                Warranty Month
Lift/Lock/Park     YES          Certificates


**********************************************************************
                        L   A   Y   O   U   T
**********************************************************************
IBM      DCAS-32160/34330  JUMPER SETTING


  +---------------------------------------------------------+
  |                                      +----------------- |
  |                            Pins 23,24++                 |XXI
  |                                  :  | |                 |XXN
  |                                  :  | |                 |XXT
  |                                 1,2 +++                 |XXE
  |                                      |                  |XXR
  |                                      |                  |XXF
  |                                      |                  |XXA
  |                                      |                  |XXC
  |                                      |                  |XXE
  |                                      |                  |XX
  |                                      |                  |XX
  |  Back Side of the Drive              |                  |XX
  |                                      |                  |XX Power
  |                                      +------------------|
  +---------------------------------------------------------+



**********************************************************************
                      J   U   M   P   E   R   S
**********************************************************************
IBM      DCAS-32160/34330  JUMPER SETTING

 Jumper Setting
 ==============

 OPTION BLOCK
 Jumper Setting
 Jumper position and function are as shown below. Pin pitch is 2mm.


                   +-------------- Disable Auto Spin Up
    Device ID      |   +--------- RESERVED
   +---+---+---+   |   |   +---- Unit attention Disable
   |   |   |   |   |   |   |   +--------------- Enable TI-SDTR/WDTR
   |   |   |   |   |   |   |   |   +----------- Auto Start delay
   |   |   |   |   |   |   |   |   |   +------- Delay start 6/12
   |   |   |   |   |   |   |   |   |   |   +--- Disable SCSI Parity
   |   |   |   |   |   |   |   |   |   |   |
 JP1 JP2 JP3 JP4 JP5 JP6 JP7 JP8 JP9 JP10 JP11 +- LED Cathode
 +--++--++--++--++--++--++--++--++--++--++--++--+JP12
 |24||22||20||18||16||14||12||10||08||06||04||02|
 +--++--++--++--++--++--++--++--++--++--++--++--+
 +--++--++--++--++--++--++--++--++--++--++--++--+
 |23||21||19||17||15||13||11||09||07||05||03||01|
 +--++--++--++--++--++--++--++--++--++--++--++-++
  +----+---+---+---+---+---+---+---+---+---+   +- LED Anode
                     Ground

 JP1 do not exist on 50 Pin models!

   +----------+-------------------------------+
   | SCSI ID  |       Jumper Location         |
   |          |             PINS              |
   |          |  JP1  |  JP2  |  JP3  |  JP4  |
   +----------+-------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  | OPEN  |
   +----------+-------+-------+-------+-------+
   |    1     | OPEN  | OPEN  | OPEN  | CLOSED|
   +----------+-------+-------+-------+-------+
   |    2     | OPEN  | OPEN  | CLOSED| OPEN  |
   +----------+-------+-------+-------+-------+
   |    3     | OPEN  | OPEN  | CLOSED| CLOSED|
   +----------+-------+-------+-------+-------+
   |    4     | OPEN  | CLOSED| OPEN  | OPEN  |
   +----------+-------+-------+-------+-------+
   |    5     | OPEN  | CLOSED| OPEN  | CLOSED|
   +----------+-------+-------+-------+-------+
   |    6     | OPEN  | CLOSED| CLOSED| OPEN  |
   +----------+-------+-------+-------+-------+
   |    7     | OPEN  | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+-------+
   |    8     | CLOSED| OPEN  | OPEN  | OPEN  |
   +----------+-------+-------+-------+-------+
   |    9     | CLOSED| OPEN  | OPEN  | CLOSED|
   +----------+-------+-------+-------+-------+
   |   10     | CLOSED| OPEN  | CLOSED| OPEN  |
   +----------+-------+-------+-------+-------+
   |   11     | CLOSED| OPEN  | CLOSED| CLOSED|
   +----------+-------+-------+-------+-------+
   |   12     | CLOSED| CLOSED| OPEN  | OPEN  |
   +----------+-------+-------+-------+-------+
   |   13     | CLOSED| CLOSED| OPEN  | CLOSED|
   +----------+-------+-------+-------+-------+
   |   14     | CLOSED| CLOSED| CLOSED| OPEN  |
   +----------+-------+-------+-------+-------+
   |   15     | CLOSED| CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+-------+

 50-Pin (narrow SCSI) device have 8 possible addresses with address 7
 (highest priority) normally reserved for the controller.


 SCSI ID 50 PIN Models
 ---------------------
   +----------+-----------------------+
   | SCSI ID  |        Jumpers        |
   |          | JP2   | JP3   | JP4   |
   +----------+-------+-------+-------+
   |    0     | OPEN  | OPEN  | OPEN  |
   +----------+-------+-------+-------+
   |    1     | OPEN  | OPEN  | CLOSED|
   +----------+-------+-------+-------+
   |    2     | OPEN  | CLOSED| OPEN  |
   +----------+-------+-------+-------+
   |    3     | OPEN  | CLOSED| CLOSED|
   +----------+-------+-------+-------+
   |    4     | CLOSED| OPEN  | OPEN  |
   +----------+-------+-------+-------+
   |    5     | CLOSED| OPEN  | CLOSED|
   +----------+-------+-------+-------+
   |    6     | CLOSED| CLOSED| OPEN  |
   +----------+-------+-------+-------+
   |    7     | CLOSED| CLOSED| CLOSED|
   +----------+-------+-------+-------+



**********************************************************************
                      I   N   S   T   A   L   L
**********************************************************************
IBM      DCAS-32160/34330  ULTRASTAR 2ES  INSTALLATION GUIDELINES

 Notes on installation
 =====================

 Installation direction
 ----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

 The drive will operate in all axis (6 directions).

 Mount the drive securely, using the appropriate brackets or rails, in
 any axis, using four 6-32 UNC metric screws in either bottom or side
 mounting holes.

 The max. screew insertion depth for the bottom mounting is 6.0mm
 (0.23 inch) and for side mounting 3.5 mm (0.14 inch).


