
M 2 6 3 5 T    FUJITSU
NO MORE PRODUCED                                      Native|  Translation
                                                      ------+-----+-----+-----
Form                 2.5"/SUPERSLIMLINE    Cylinders    1574|  698|     |
Capacity form/unform   160/      MB        Heads           4|    8|     |
Seek time   / track  14.5/ 3.0 ms          Sector/track     |   56|     |
Controller           IDE / AT              Precompensation
Cache/Buffer           224 KB READ-AHEAD   Landing Zone
Data transfer rate    2.670 MB/S int       Bytes/Sector      512
                      8.000 MB/S ext
Recording method     RLL 1/7                        operating  | non-operating
                                                  -------------+--------------
Supply voltage     5 V          Temperature *C         5 55    |    -40 70
Power: sleep              W     Humidity     %         8 90    |      5 95
       standby        0.2 W     Altitude    km    -0.300  3.000| -0.300 12.000
       idle           1.8 W     Shock        g        10       |    100
       seek           2.5 W     Rotation   RPM      4500
       read/write         W     Acoustic   dBA        30
       spin-up            W     ECC        Bit   88-REED SOLOMON,ON THE FLY
                                MTBF         h     150000
                                Warranty Month
Lift/Lock/Park     YES          Certificates                                  

**********************************************************************
                        L   A   Y   O   U   T
**********************************************************************
FUJITSU  M2634T/35T/2636T  JUMPER SETTING

  +---------------------------------------------------------+
  |                                                         |XX
  |                                                         |XXI
  |                                                         |XXN
  |                                                         |XXT
  |                                                         |XXE
  |                                                         |XXR
  |                                                         |XXF
  |                                                         |XXA
  |                                                         |XXC
  |                                                         |XXE
  |                                                         |XX
  |                                                         |XX
  |                                                         |XXMaster/
  |                                                         |xxSlave
  +---------------------------------------------------------+





**********************************************************************
                      J   U   M   P   E   R   S
**********************************************************************
FUJITSU  M2634/35/36T  JUMPER SETTING

 Jumper Setting
 ==============

 Master/Slave
 ------------
 The drive only has a master/slave setting which is configured by
 pins 2 & 4 of the interface connector. It should be noted that these
 pins are horizontally adjacent to each other.

 Pins 2-4  OPEN    MASTER (Default)

           CLOSED  SLAVE



**********************************************************************
                      I   N   S   T   A   L   L
**********************************************************************
-ANY DIREC.

 Notes on installation
 =====================

 Installation direction
 ----------------------

     horizontally                           vertically
   +-----------------+             +--+                       +--+
   |                 |             |  +-----+           +-----+  |
   |                 |             |  |     |           |     |  |
 +-+-----------------+-+           |  |     |           |     |  |
 +---------------------+           |  |     |           |     |  |
                                   |  |     |           |     |  |
                                   |  |     |           |     |  |
 +---------------------+           |  +-----+           +-----+  |
 +-+-----------------+-+           +--+                       +--+
   |                 |
   |                 |
   +-----------------+

 The drive will operate in all axis (6 directions).



**********************************************************************
                      F   E   A   T   U   R   E  S
**********************************************************************
FUJITSU  MEDIA DEFECTS

 Media Defects
 -------------
 Before the unit leaves the factory, media defects are listed on the
 MEDIA DEFECT LIST. This list is written on the media in the SA space
 which is a reserved area of the disk.


